Automatic Hot Press

产品详情

该设备是我公司新款全自动热压机。采取了程序自动多段控温、控压，自动泄压设置，更能满足高校和科研单位等对各种粉末、塑料薄膜、橡胶材料、皮革、化工、及其它固体材料进行高温、高压制样的研发测试需求。

| 产品组成

| 使用过程

| 产品特点

保压性能好：10min掉压不大于5%
宽范围精准控压：可实现最大吨位1%的小压力精准输出，如30吨规格压片机可实现0.3吨压力的精准输出，解决了行内自动压片机普遍不能用于小压力精准控制的难题，应用范围更广，使用的模具更小
程序加压：5段程序控温控压，智能补压，无人值守压片退样
触控屏操作：7寸屏中英文双语，控温控压精准，带橡胶手套也可灵敏触控
多重安全保障：模具超压警示、过压过行程保护、自动定时泄压保护、人工紧急制动、侧面钢板正面有机玻璃物理防护
数据管理功能：自动换算样品所承受压强（Mpa）、可储存、对比查看、USB导出过程数据，以往实验参数可调用自动重复快速压样

| 产品规格

产品型号	RYZ-300D Series	RYZ-500D Series
Mould Size	180×180mm (multiple sizes available, customised)	400 x 400mm (multiple sizes available, customised)
Mould heating range	Room temperature - 300°C	Room temperature - 500°C
Equipment power	Approx. 1800W	Approx. 1800W
Pressure range	1-50T, other pressure ranges can be customised.
Cylinder diameter	95mm
Cylinder stroke	60mm
Dimension of the whole machine	270 x 400 x 600 to 500 x 600 x 760 (by model)
Temperature control method	5 adjustable, continuous or segmented temperature control
Equipment Insulation Methods	Imported heat insulation board + stainless steel water-cooled heat insulation board
Type of heating mould	Double flat plate heating up and down
Temperature control accuracy	1℃
Pressure control accuracy	0.1T
Display mode	7-inch touch screen touch operation
Mould Pressure Conversion	Programmed automatic conversion / and direct display of the pressure of the sample (MPa)
Data management	Can be managed, stored, viewed, recalled, exported
Power Consumption	220V（50Hz/60Hz）
Equipment weight	Approx. 160kg-460kg (weight varies by model)
软件管理	支持升级
Power Consumption	220V（50Hz/60Hz）
Standard configuration	Hot press host + temperature control machine 1 (water cooler optional, 500 ℃ or more must be equipped) (Optional water cooler or air cooled cooling)

申请打样